LAN Interface R&S ESCI
1166.6004.12 4.330 E-1
Configuration of Controller
A precondition for the operation of the remote desktop is the availability of the TCP/IP protocol on the
controller and the installation of the remote desktop client.
Note:
For Windows XP, the remote desktop client is part of the operating system and available under Start -
Programs - Accessories - - Communications - Remote Desktop Connection.
For other Windows versions, Microsoft offers the remote client as a separate program package for
subsequent installation.
The settings on the remote desktop client of the controller must be made prior to setting up the
connection with the R&S FSP. The following steps are required:
! Press the Windows key or <CTRL><ESC>.
! Select Programs - Accessories - Communications - Remote Desktop Connection.
The Remote Desktop Connection screen will be opened.
! Click the Options >> button.
The tabs with the configuration data will be
opened.
To Next Page
Loading...
