Configuration/Setup R&S ESCI
1166.6004.12 4.234 E-3
Service Menu
The service menu offers a variety of additional functions which are used for maintenance and/or trouble
shooting.
Caution:
The service functions are not necessary for normal measurement operation. However,
incorrect use can affect correct operation and/or data integrity of the R&S ESCI.
Therefore, many of the functions can only be used after entering a password. They
are described in the instrument service manual.
SETUP menu:
SERVICE
SELFTEST
ENTER
PASSWORD
INPUT
RF
INPUT
CAL
SELFTEST
RESULTS
CAL GEN
128 MHZ
PULSE
10 kHz
PULSE
8 MHz
PULSE
4 MHz
PULSE
2 MHz
PULSE
1 MHz
PULSE
500 kHz
PULSE
200 kHz
PULSE
100 kHz
The SERVICE softkey opens a submenu for
selection of the service function.
The INPUT RF and INPUT CAL softkeys are
mutually exclusive selection switches. Only one
switch can be active at any one time.
To Next Page
Loading...
