R&S ESCI Measurement Documentation
1166.6004.12 4.263 E-1
Entering a Text with the Auxiliary Line Editor
The auxiliary line editor is opened automatically when the COMMENT softkey is clicked.
The entry area consists of two parts:
• the editing line
• the character selection field
Changeover from the editing line to the character selection is performed with the cursor down
key.
Navigation in the character selection field is possible with the spinwheel or the cursor keys
,
,
and
Pressing the spinwheel or the ENTER key transfers the desired characters to the editing line.
The fields in the last line of the character selection field are assigned special functions.
SPACE inserts a space in the editing line
<< shifts the cursor in the editing line by one character to the left
>> shifts the cursor in the editing line by one character to the right
BACK clears the character before the cursor
EXIT stores the content of the editing line and closes the auxiliary line editor
Return to the editing line from the first line of the character selection field using the cursor up
key.
Navigation within the editing line is also performed with the spinwheel or the cursor keys
and
Figures, decimal points and signs are directly entered in the editing line using the keypad on the front
panel. When a PC keyboard is connected, letters and special characters can also be directly entered.
Editing is terminated from the editing line with ENTER if the text should be stored, and with ESC when
the entered text should be aborted. In both cases the auxiliary line editor is closed.
To Next Page
Loading...
