Measurement Documentation R&S ESCI
1166.6004.12 4.262 E-1
SATURATION
The SATURATION softkey serves for determining the
saturation of the element selected.
A value between 0 and 100% can be entered.
IEC/IEEE-bus command:
HCOP:CMAP5:HSL <hue>,<sat>,<lum>
PREDEFINED
COLORS
The PREDEFINED COLORS softkey opens a list from
which predefined colours for the displayed elements
can be selected:
COLOR
YELLOW
BLACK
BLUE
BROWN
GREEN
CYAN
RED
MAGENTA
WHITE
GRAY
LIGHT GRAY
LIGHT BLUE
LIGHT GREEN
LIGHT CYAN
LIGHT RED
LIGHT MAGENTA
IEC/IEEE-bus command:
HCOP:CMAP1 ... 26:PDEF <color>
SET TO
DEFAULT
The SET TO DEFAULT softkey reactivates the default
colour setting (= OPTIMIZED COLORS).
IEC/IEEE-bus command: -
To Next Page
Loading...
