R&S ESCI Measurement Documentation
1166.6004.12 4.261 E-1
SCREEN
COLORS
The SCREEN COLORS softkey selects the current screen
colours for the printout.
Note: The background is always printed in white and the grid
in black.
IEC/IEEE-bus command: HCOP:CMAP:DEF1
OPTIMIZED
COLORS
The OPTIMIZED COLORS softkey selects an optimized colour
setting for the printout to improve the visibility of the colours on
the hardcopy.
Trace 1 is blue, trace 2 black, trace 3 green, and the markers
are turquoise.
The other colours correspond to the display colours of the
DISP – CONFIG DISPLAY -DEFAULT COLORS 1 softkey.
Note: The background is always printed in white and the grid
in black.
IEC/IEEE-bus command: HCOP:CMAP:DEF2
USER
DEFINED
The USER DEFINED softkey opens a submenu for user-
defined colour selection (see submenu USER DEFINED
COLORS ).
IEC/IEEE-bus command: HCOP:CMAP:DEF3
SELECT
OBJECT
The SELECT OBJECT softkey allows picture elements to
be selected to change their colour setting. After selection,
the PREDEFINED COLORS, BRIGHTNESS, TINT and
SATURATION softkeys enable the user to change the
colours or brightness, the hue and the colour saturation of
the element selected.
IEC/IEEE-bus command: -
BRIGHTNESS
The BRIGHTNESS softkey serves for determining the
brightness of the graphic element selected.
A value between 0 and 100% can be entered.
IEC/IEEE-bus command:
HCOP:CMAP5:HSL <hue>,<sat>,<lum>
TINT
The TINT softkey serves for determining the hue of
the element selected. The percentage entered refers
to a continuous colour spectrum from red (0%) to blue
(100%).
IEC/IEEE-bus command:
HCOP:CMAP5:HSL <hue>,<sat>,<lum>
To Next Page
Loading...
