Measurement Documentation R&S ESCI
1166.6004.12 4.268 E-1
! Select the Browse button with the
spinwheel and confirm with by pressing
the spinwheel.
The Locate File dialog is opened.
! Turn the spinwheel to select the directory
and path D:\I386 and press it to confirm
the selection.
If the selected item is not printed on a blue
background, it must be marked with the
cursor up / down keys before it can be
activated by pressing the spinwheel.
! Select the driver file with the spinwheel
and confirm by pressing the spinwheel.
The file is included in the Files Needed
dialog.
Note:
If the desired file is not in the D:\I386
directory, a disk with the driver file is
needed. In this case, exit the dialog with
ESC and repeat the selection starting from
the "Files needed" dialog.
To Next Page
Loading...
