R&S ESCI Manuals
1166.6004.12 0.1 E-1
Contents of Manuals for EMI Test Receiver R&S ESCI
Operating Manual R&S ESCI
The operating manual describes the following models and options of EMI test receiver ESCI:
• R&S ESCI
• Option FSP-B4 OCXO - reference oscillator
• Option FSP-B6 TV trigger
• Option FSP-B9 tracking generator
• Option FSP-B10 external generator control
• Option FSP-B16 LAN interface
This operating manual contains information about the technical data of the instrument, the setup
functions and about how to put the instrument into operation. It informs about the operating concept
and controls as well as about the operation of the R&S ESCI via the menus and via remote control.
Typical measurement tasks for the R&S ESCI are explained using the functions offered by the
menus and a selection of program examples.
Additionally the operating manual includes information about maintenance of the instrument and
about error detection listing the error messages which may be output by the instrument. It is subdi-
vided into the data sheet plus 9 chapters:
The data sheet informs about guaranteed specifications and characteristics of the instrument.
Chapter 1 describes the control elements and connectors on the front and rear panel as well
as all procedures required for putting the R&S ESCI into operation and integration
into a test system.
Chapter 2 gives an introduction to typical measurement tasks of the R&S ESCI which are
explained step by step.
Chapter 3 describes the operating principles, the structure of the graphical interface and of-
fers a menu overview.
Chapter 4 forms a reference for manual control of the R&S ESCI and contains a detailed
description of all instrument functions and their application. The chapter also lists
the remote control command corresponding to each instrument function.
Chapter 5 describes the basics for programming the R&S ESCI, command processing and
the status reporting system.
Chapter 6 lists all the remote-control commands defined for the instrument. At the end of the
chapter a alphabetical list of commands and a table of softkeys with command
assignment is given.
Chapter 7 contains program examples for a number of typical applications of the R&S ESCI.
Chapter 8 describes preventive maintenance and the characteristics of the instrument’s in-
terfaces.
Chapter 8 gives a list of error messages that the R&S ESCI may generate.
Chapter 9 contains a list of error messages.
Chapter 10 contains an index for the operating manual.
To Next Page
Loading...
