R&S ESCI Analyzer - MKR ->
1166.6004.12 4.139 E-1
NEXT PEAK
The NEXT PEAK softkey sets the active marker/delta marker to the next
lower maximum of the selected trace.
IEC/IEEE-bus commands: CALC:MARK:MAX:NEXT
CALC:DELT:MAX:NEXT
NEXT PEAK
RIGHT
The NEXT PEAK RIGHT softkey sets the active marker/delta marker to the
next lower maximum right of the current marker position on the selected tra-
ce.
IEC/IEEE-bus commands: CALC:MARK:MAX:RIGH
CALC:DELT:MAX:RIGH
NEXT PEAK
LEFT
The NEXT PEAK LEFT softkey sets the active marker/delta marker to the
next lower maximum left of the current marker position the selected trace.
IEC/IEEE-bus commands: CALC:MARK:MAX:LEFT
CALC:DELT:MAX:LEFT
SEARCH
LIMITS
RIGHT
LIMIT
LEFT
LIMIT
THRESHOLD
SEARCH LIM
OFF
The SEARCH LIMITS softkey limits the search range for maxi-
mum or minimum search. The softkey switches to a submenu in
which the search range limits can be set in the x and y direction.