Rohde & Schwarz EMI Test ReceiverESCI - Page 326

Limit Lines R&S ESCI
1166.6004.12 4.194 E-1
LINES menu
DISPLAY
LINE 2
FREQUENCY
LINE 1
DISPLAY
LINE 1
FREQUENCY
LINE 2
TIME
LINE 1
TIME
LINE 2
Frequency Domain
(Span > 0 Hz)
Time Domain
(Span = 0 Hz)
DISPLAY
LINES
DISPLAY
LINE 1
DISPLAY
LINE 2
The DISPLAY LINE 1/2 softkeys enable or disable the level lines and allow
the user to enter the position of the lines.
The level lines mark the selected level in the measurement window.
IEC/IEEE-bus command: CALC:DLIN:STAT ON
CALC:DLIN -20dBm
FREQUENCY
LINE 1
FREQUENCY
LINE 2
The FREQUENCY LINE 1/2 softkeys enable or disable the frequency lines
1/2 and allow the user to enter the position of the lines.
The frequency lines mark the selected frequencies in the measurement
window.
Note: The two softkeys cannot be used in the time domain (span = 0).
IEC/IEEE-bus command: CALC:FLIN:STAT ON
CALC:FLIN 120MHz
TIME
LINE 1
TIME
LINE 2
The TIME LINE 1/2 softkeys enable or disable the time lines 1/ and allow the
user to enter the position of the lines.
The time lines mark the selected times or define search ranges (see section
"Marker Functions ").
Note: The two softkeys cannot be used in the frequency domain (span >
0).
IEC/IEEE-bus command: CALC:TLIN:STAT ON
CALC:TLIN 10ms