Configuration/Setup R&S ESCI
1166.6004.12 4.228 E-3
NETWORK
LOGIN
The NETWORK LOGIN softkey opens the dialog box with the auto login
settings.
When a network is installed, the preset user name 'Instrument' and the
password 'instrument' can be adapted to a new user (see section 'Defining
Users' in the LAN interface manual).
With the 'Auto Login' option active, an automatic registration is performed
during booting with the specified user name and password. Otherwise the
Windows XP login request is displayed during booting.
Notes: - A PC keyboard with trackball (or additional mouse instead) is
required for the installation/configuration of the network
support.
- The softkey is only available with built-in LAN interface FSP-
B16".
IEC/IEEE-bus command: -
To Next Page
Loading...
