R&S ESCI LAN Interface
1166.6004.12 4.325 E-1
! Highlight printer and select with "OK".
! Confirm the following request to install a
suitable printer driver using "OK".
The selection of printer drivers will be
displayed.
The manufacturers are displayed in the left-
hand table and the available printer drivers in
the right-hand table.
! First highlight the manufacturer in the
selection list "Manufacturers" and then the
printer driver in the selection list "Printers" .
Note:
If the desired printer type does not appear in
this list, the driver has not yet been installed
in the instrument. In this case, click the
"HAVE DISK" button. A request to insert a
disk with the corresponding printer driver will
appear. Then click "OK" and select the
desired printer driver.
! Click "Next".
If one or several printers have already been
installed, the query of whether the printer
installed so far is to be selected as the
default printer for the Windows XP
applications will be displayed. "No" is preset.
To Next Page
Loading...
