7. Internal Web pages
Issue 06/15 Publication PUB059-002-00 115 of 136
7.6.5 Network IP address settings
The IP address for web page and Modbus TCP communication is set on the Network page. See
section 7.5.22.
The MAC ID for each Pakscan 3 CPU module is unique and fixed at time of manufacture. The IP
address and Netmask (subnet mask) can be altered to suit the individual application and match the
needs of the network.
Note: When the IP address is changed, the comms link will fail when the new value becomes active in
the master station following the master station reboot. The web browser must be restarted and
directed to the new IP address.
Re-establishing Ethernet Communication with a new IP address:
Because most computers associate a MAC ID to each IP address, it is possible that the computer
will not be able to re-establish communication with the master station until the computer has been
rebooted.
To Next Page
Loading...
