P3 - Pakscan Master Station Technical Manual
54 of 136 Publication PUB059-002-00 Issue 06/15
7.4 Web Page Structure
The web pages have three access levels, each requiring a password with the correct level set. A user
enters the web server with a particular degree of access to the functions of the server and the master
station.
7.4.1 User Levels
Allows access to read master station status and settings,
plus the option module status and settings, plus the
actuator and field unit status on the option module
network. No commands or alterations to the system are
permitted.
As for read access with the addition of the ability to issue
network commands, swap masters and command
actuators on the option module network to change
position.
As for the two lower levels plus the ability to configure the
master station, option modules and all system settings.
Set and remove user names and passwords; set alarm
reporting parameters, change system addresses and test
system communications.
The Administrator level sets all other user names and passwords. As soon as the system is set up the
default password should be changed. Make sure all changes made to log in details are recorded.
7.4.2 Overview of Web Page Layout
The web pages are organised using a menu structure with the primary menu on the top of each page.
Within a page there are other controls for parameter alteration or to reveal extended information on
the topic of the particular page.
Navigation between the pages is by selecting another topic on the main menu.
If there is no activity with the mouse to change the display or update the information or selection for a
few minutes, the system automatically logs out the user. The username and password must be re-
entered to continue using the pages.
To Next Page
Loading...
