rotork p3 - Page 61

7. Internal Web pages
Issue 06/15 Publication PUB059-002-00 61 of 136
Controls - Available to all user levels
ms datalogger : Reveals a pop-up showing a log of the activity on the master station and
the source of requests or commands received. See section 7.5.5 for
details.
host analyser : Reveals a pop-up with the data logger data and the additional controls
required for using the inbuilt data analyser for commands and data sent to
the host system. See section 7.5.6.
Option 1 Diagnostics
Pakscan
wireless network
:
Shows module type and status, or ‘Not Fitted’ when there is nothing in the
slot.
Option Health
:
Shows a green light when healthy and a red light if there is a fault on the
module.
Option 2 Diagnostics
Pakscan 2 Loop : Shows module type and status, or ‘Not Fitted’ when there is nothing in the
slot.
Option Health : Shows a green light when healthy and a red light if there is a fault on the
module.
Controls - Available (when module fitted) to all user levels
diagnostics : Reveals the diagnostic page for the option module fitted. See section 7.5.7
Pakscan 2 Loop and section 7.5.8 Pakscan Wireless.
event log : Shows the option module event recorder. See section 7.5.9 Pakscan 2
Loop and section 7.5.10 Pakscan Wireless.