7. Internal Web pages
Issue 06/15 Publication PUB059-002-00 89 of 136
Save : Saves the logger data to a file on the computer.
GPFCU Controls - Available to Write and Administrator user levels only
Energise : Command to energise the relays (green light when energised).
Relay 1-4
De-energise : Command to de-energise the relays (red light when de-energised).
Relay 1-4
AO : A slider control that is used to generate a 0-5volt analogue output. Slider
range 0 - 100%.
All the controls have a confirmation pop-up, so that the action has to be confirmed before it
takes place.
To Next Page
Loading...
