106 • Advanced Operations Sam4POS Operators Manual v2.33
Adding to a Check – Method 1
1. To add additional items to a stored check, you can either:
a. Enter the check number and touch the RECALL Table function – or –
b. Use the LIST Table function to select a check from a list to open:
2. Touch a check from the list to select it. The check detail is displayed:
Details for the selected
check are displayed in
the left column.
3. Touch OPEN to open the selected check.
4. Enter the new items ordered.
5. Touch the Store Table function; the check is stored/serviced or press the Print Check key to print the
check before storing.
To Next Page
Loading...
