24 • Getting Started Sam4POS Operators Manual v2.33
Register Mode Screen
Layout
On the SAP-6600 & SAP-4800II terminals, touch the Register Mode icon on the Main Menu screen to
open the Sam4POS Register Mode Operator Screen. On the SAP-630 & SAP-530 terminals, turn the
mode key to the REG position.
The register mode operator screen is divided into different zones to facilitate regular sales transactions. Review the
“Register Mode Screen Zones” table on the next page for details about each zone.
E
D
B
C
F
A
Pressing the Back Arrow icon in the upper left corner of the screen will close the register mode operators
screen and return to the main menu screen on the SAP-6600/SAP-4800II.
On the SAP-630/SAP530 the current employee will be signed off and the main sign on screen will display.
To Next Page
Loading...
