86 • Basic Operations Sam4POS Operators Manual v2.33
Sample Transaction – Tip Entry at PIN-Pad
If the Datacap Tip Entry option is set to “Prompt on PIN-PAD” (S-Mode System Option/Page 6) a tip line will not
be printed, and the customer will be prompted for tip entry at the PIN-Pad.
1. Register a normal transaction.
2. Touch the appropriate MISC TEND key. At the register, the message “WORKING” displays:
3. At the PIN-Pad the message displays:
Enter Tip Amount?
YES NO
4. Select YES to enter TIP; Pin-Pad displays:
Enter TIP Amount
5. At the Pin-Pad, enter the desired TIP amount
SALE
$1.20 – OK?
6. Press the GREEN button on the PIN-Pad keypad.
7. Insert the EMV card into the PIN-Pad. The PIN-Pad will display “PLEASE WAIT”, then “DO NOT
REMOVE CARD”, and then “PROCESSING”.
8. When the processing is complete, the “APPROVED” message will display.
9. Remove the card from the PIN-Pad.
10. At the register, the receipt and card draft are printed.
To Next Page
Loading...
