88 • Basic Operations Sam4POS Operators Manual v2.33
Sample Transaction - Debit
1. Register a normal transaction.
2. Touch the appropriate MISC TEND key. At the register, the message “WORKING” displays:
3. At the PIN-Pad the message displays:
SALE
$2.00 – OK?
4. Press the GREEN button on the PIN-Pad keypad.
5. Insert the EMV card into the PIN-Pad. The PIN-Pad will display “PLEASE WAIT”, then “DO NOT
REMOVE CARD”, and then “ENTER PIN & OK”.
6. At the PIN-Pad, enter the 4-digit PIN and press the GREEN button.
7. The PIN-Pad will display “DO NOT REMOVE CARD” and then “PROCESSING”.
8. When the processing is complete, the “APPROVED” message will display.
9. Remove the card from the PIN-Pad.
10. At the register, the receipt and card draft are printed.
To Next Page
Loading...
