54
•
Basic Operations Sam4POS Operators Manual v2.33
Note # Operation
The Note # function key can be used to enter information on a receipt, kitchen printout or guest check. Multiple
Note # keys may be created and a specific Note # key may be linked to a destination key to automatically bring up
the Note # entry dialog.
Use this key to add a Note (up to 30-characters) to the transaction, the note will display at the top of the transaction
detail in the register mode.
1. If a destination key that has a Linked Note # defined is pressed, the Input Note # dialog will display.
Alternately, you can press the Note # key to open the INPUT NOTE # dialog.
2. Type in the desired information (up to 30 characters) in the Note # dialog.
3. Press OK.
4. The Note will be added to the transaction at the top of the transaction window.
5. If the Note # is set to Print on the receipt, it will be printed in the assigned location as set in the Receipt &
Message\Receipt programming.
To Next Page
Loading...
