Sam4POS Operators Manual v2.33 Program Maintenance • 227
Adding PLU’s
Items not currently in the PLU file can be added using the PLU Info key.
1. From the Register Mode, press the PLU INFO key; to display the PLU Info dialog.
2. Scan the item, if the item is not currently in the PLU file, the ADD NOT FOUND PLU dialog displays:
3. Press the ADD NOT FOUND PLU button to add the item to the PLU file. The Register PLU dialog
displays:
4. Enter the information for the new PLU:
• Price for the item
• Group assignment
• PLU Status Group assignment
5. When finished, press OK; you are returned to the PLU INFO screen. Pressing CANCEL will exit without
applying any changes.
6. Continue editing PLU’s as necessary, press OK & RETURN TO REG to save the new price and return to
the register mode.
To Next Page
Loading...
