Sam4POS Operators Manual v2.33 Introduction • 15
Optional Integrated Rear
2 Line by 20 Character
VFD Customer Display
SAP-6600 Connection Panel
• COM1, COM2 = DB9M With Pin 9 voltage (+5V)
• COM3 = RJ45 Pin 8 (0V / +5V / 12V) Voltage selectable in BIOS
• Audio Line-Out port
• Four v3.0 USB Ports on I/O / Two on rear/side I/O
• LAN Port: RJ45 10/100/1000 Base-T
• VGA Port = DB15F for second display (Maximum resolution: 1920 x 1200)
• Power Connection for External 60W, 12V / 5A power adaptor 100-240V / 50-60Hz
• DC-Out (12V)
Standard Cash Drawer Port
(Located on the right side of the
connection panel near the DC-Out
and the Power Button.)
Selectable 24V / 12V
To Next Page
