Sam4POS Operators Manual v2.33 Advanced Operations • 115
TIP Entry
Tips can be entered to open guest checks in the system using the TIP Charge function key.
Gratuities/Tips received after a sale is tendered with a credit card can be added to the transaction from the register
mode using the EFT Operation function key or the List Paid function key. The EFT Operation menu in the
Program Mode, Device, EFT Operation may also to enter tips. Gratuities (Tips) indicated by the customer on the
payment draft must be entered at the ECR before the batch is closed.
Refer to the Post-Finalization Procedures: TIP (Gratuity) Entry on page 139 for TIP Entry using the List Paid key.
Refer to page 263 for Gratuity Entry from the EFT OPERATION function key menu in the Register Mode or from
the EFT OPERATION menu in the Program Mode – Device menu selections.
TIP Charge
Use TIP CHARGE to enter Tips to an open guest check.
1. Recall an open check in the system:
a. Enter the check number and touch the RECALL Table function.
b. Alternately, you can use the LIST Table function to select a check from a list to open.
2. Enter any new items if necessary, press SBTL; Then press the TIP Charge key. The OPEN TIP dialog is
displayed.
3. Input the amount of the TIP received, then press ENTER. The tip will be added to the check. Pressing the
X in the upper right of the dialog will exit and close the dialog without adding the tip.
4. You can store the check or tender the check as required.
To Next Page
Loading...
