Sam4POS Operators Manual v2.33 Program Maintenance • 233
Copy to Items by Range
This feature allows you to copy a single PLU to a range of sequential PLU’s. This makes creating multiple PLU’s
easier than adding them one at a time.
1. Press and Hold the item you wish to copy to open the PLU Dialog Menu selections.
2. Select Copy to Items by Range, the Copy to Items by Range dialog displays:
3. The PLU Descriptor/PLU Code displays at the top of the sub menu.
4. Using the keypad provided, enter the desired range of PLU’s you want to create:
• Enter the first PLU# in the range in the FROM PLU field; Press icon, pressing the X will clear
the current entry.
• Enter the last PLU# in the range in the TO PLU field; Press icon, pressing the X will clear the
current entry.
• Enter the integer for the BETWEEN PLU. For example: enter 1 to copy to every single PLU in
the range, enter 5 to create PLU’s every 5
th
number 5, 10, 15, etc.
5. If you want to copy the PLU descriptor to the selected range, check the DESCRIPTION box.
6. Select the individual OPTIONS you wish to copy to the selected PLU range (you can scroll up/down the
list of options) or check SELECT ALL.
7. Press OK when you have completed your selections, the new PLU items will be created; pressing
CANCEL will exit without creating the new PLU’s.
Copy the Price to Existing Items
This feature is similar to the ‘Copy to Existing Items’ operation on page 232 except that only the price levels are
copied to the items selected.
To Next Page
Loading...
