50 • Basic Operations Sam4POS Operators Manual v2.33
– Main Sign On Screen
When the Time Keeping option “Display Sign On Screen” is checked, the Time In/Out button appears on the main
sign on screen allowing clock in/out operations from the main sign on screen.
1. From the Main Sign On screen; Tap the Time In/Out button at the top of the number entry dialog so it is
selected as shown below:
2. Enter the employee clock in code and touch the ENTER button to display the Time In/Out window:
Job Codes that are available for
the employee are displayed.
3. Touch the JOB CODE selection for the job you will be performing; The clock-in time displays with the
Job Code:
4. Touch OK to complete the clock in.
To Next Page
Loading...
