Sam4POS Operators Manual v2.33 Advanced Operations • 103
List Table
Use the List Table key to view open Tables (checks) in the system. Settings can be made so an employee can see
only their own open checks or view all open checks.
1. Touch the LIST TABLE key to
display open checks.
2. Touch a check to select it. The
selected check is displayed in the
left column.
3. The functions available on the
LIST TABLE screen are:
a. PRINT CHECK – prints a
customer copy of the selected
check.
Note: This is not the same as pressing
the Print Check Function Key.
b. MERGE & SPLIT - used to
combine checks or to split the
check into two or more
separate checks.
c. OPEN - to open the check to
add items or for payment.
d. Pressing CLOSE will exit back to the Register Mode.
4. If a check is locked you can press
and hold on the check in the list,
then press UNLOCK on the
dialog that pops up.
5. Press anywhere outside the message dialog to clear the message without deleting the check.
To Next Page
Loading...
