264 • Appendix Sam4POS Operators Manual v2.33
3. The Display shows the tip entry on the EFT Operation dialog:
4. Press CLOSE to exit the TIP entry; pressing PRINT will print the information on the display.
Post Authorization
If electronic authorization is not approved and the merchant receives voice authorization from their processor, the
transaction can be entered into the batch with this function.
Note: This operation does not adjust any other cash register totals or counters.
Parameter Download
Use this operation to load the EMV parameters into the PIN-Pad. Perform this operation after loading the Datacap
device parameters (Self-Initiated Load).
1. From the main PROGRAM MODE menu screen, select DEVICE, then touch EFT OPERATION.
2. Select Datacap_Operation from the selections.
3. Scroll down the list of options and touch PARAMETER DOWNLOAD.
4. The Pin-Pad parameters will load, and the EFT OPERATION dialog is displayed.
5. You can PRINT the response if desired; then press CLOSE to exit back to the EFT Operation screen.
To Next Page
Loading...
