Section 07 PROPULSION
Subsection 01 (JET PUMP)
Use the impeller shaft pusher (P/N 529 035 955) to
press out impeller shaft no. 36 of pump housing.
Bearing no. 28, will come out with the impeller
shaft.
529 035 955
1
F18J0UB
1. Impeller shaft pusher
CAUTION: Bearing inner race being in 2 parts,
bearing may fall apart during removal.
Use the seal/bearing pusher (P/N 529 035 819) to
press out bearing no. 28 from impeller shaft.
1
F18J0VB
1. Seal/bearing pusher
RXP Models
Use steel blocks against inner race of bearing to
push bearing out.
1
F19J08A
1. Steel blocks
All Models
From the outlet side of pump, use the seal/bearing
pusher (P/N 529 035 819) to press out the oil seal
no. 29.
529 035 819
1
F18J0WB
1. Seal/bearing pusher
192 smr2005-019
To Next Page
Loading...
