Sencore MRD 3187B - Page 170

MRD 3187B - User Manual
Page 169 (245)
SSH
To enable/disable SSH access to the MRD 3187B with, use the following steps:
1. Press the button.
2. Use the and buttons to move the
cursor to “Network Services”, then press
the button.
3. Use the and buttons to move the
cursor to “SSH:” then press the
button.
4. Use the and buttons to change
the selection, then press the button
to save the selection.
ICMP
To enable/disable ICMP access to the MRD 3187B with, use the following steps:
1. Press the button.
2. Use the and buttons to move the
cursor to “Network Services”, then press
the button.
3. Use the and buttons to move the
cursor to “ICMP:” then press the
button.
4. Use the and buttons to change
the selection, then press the button
to save the selection.
Network Sercices
SNMP :Enabled
SSH :Enabled
►ICMP :Enabled
Menu
Pwd Strength
►Network Services
Network Interface
Network Sercices
SNMP :Enabled
►SSH :Enabled
ICMP :Enabled
Menu
Pwd Strength
►Network Services
Network Interface