EasyManua.ls Logo

Sencore MRD 3187B - Introduction; Appendix A - Acronyms and Glossary

Sencore MRD 3187B
247 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MRD 3187B - User Manual
Page 206 (245)
Appendix A Acronyms and Glossary
8VSB: Vestigial sideband modulation with 8 discrete amplitude levels.
16VSB: Vestigial sideband modulation with 16 discrete amplitude levels.
AC-3: Also known as Dolby Digital
AAC: Advanced Audio Coding
AES: Audio Engineering Society
ASI: Asynchronous Serial Interface
ATSC: Advanced Television Systems Committee
AV: Audio Video
Bit Rate: The rate at which the compressed bit stream is delivered from the channel to
the input of a decoder.
BNC: British Naval Connector
BPS: Bits per second.
CAT: Conditional Access Table
CAT6: Category 6 Cable standard for gigabit Ethernet
CC: Closed Caption
CoP: Code of Practice
CRC: Cyclic Redundancy Check
CVCT: Cable Virtual Channel Table
DHCP: Dynamic Host Configuration Protocol
DTVCC: Digital Television Closed Captioning
DVB: Digital Video Broadcasting
EBU: European Broadcasting Union
EIA: Electronic Industries Alliance
EIT: Event Information Table
EPG: Electronic Program Guide
ETM: Extended Text Message
ETT: Extended Text Table
Event: An event is defined as a collection of elementary streams with a common time
base, an associated start time, and an associated end time.
FCC: Federal Communications Commission
FEC: Forward Error Correction
Field: For an interlaced video signal, a “field” is the assembly of alternate lines of a
frame. Therefore, an interlaced frame is composed of two fields, a top field and a
bottom field.
Frame: A frame contains lines of spatial information of a video signal. For progressive
video, these lines contain samples starting from one time instant and continuing
through successive lines to the bottom of the frame. For interlaced video a frame
consists of two fields, a top field and a bottom field. One of these fields will
commence one field later than the other.
HANC: Horizontal Ancillary
HD: High Definition
High level: A range of allowed picture parameters defined by the MPEG-2 video coding
specification which corresponds to high definition television.
I/O: Input/Output
IP: Internet Protocol
LED: Light Emitting Diode
LNB: Low-Noise Block
MAC: Medium Access Control

Table of Contents

Related product manuals