Diagnostics and Troubleshooting CDHD
248 User Manual
e 1 2 4 SAVE and Pow e r Cycle Required
e124 Displayed in sequence
D e finit ion SAVE and Power Cycle Required
Type Fault
Act ive disa ble Yes
M e ssage # FLT 86
Descr iption
Param eter was changed, and requires SAVE and power
cycle to take effect.
This fault disables the drive.
Action required SAVE and then cycle power to the drive.
e 1 2 5 Fie ldbus Version M ism a tch
e125 Displayed in sequence
D e finit ion Fieldbus Version Mismatch
Type Fault
Act ive disa ble Yes
M e ssage # FLT 93
Descr iption
Et herCAT - the Microblaze version does not m atch the
version specified by drive.
This fault disables the drive.
Action required
Make sure the correct version has been downloaded to
the drive.
e 1 2 6 ESI Ve rsion Mism a tch
e126 Displayed in sequence
D e finit ion ESI Version Mismatch
Type Fault
Act ive disa ble Yes
M e ssage # FLT 94
Descr iption
Et herCAT - the ESI version does not m atch the version
specified by drive.
This fault disables the drive.
Action required
Make sure the correct version has been downloaded to
the drive.
To Next Page
