Start-up and Parameter Settings
FLOWSIC100 · Operating Instructions · 8012513/YSA5/V 2-1/2016-07 · © SICK Engineering GmbH 125
Subject to change without notice
Password
Certain device functions are first accessible after a password has been entered (
Fig. 99).
Access rights are assigned in 3 user levels:
*): Depending on program version
The Level 1 password is "sickoptic".
Fig. 99 Entering the password
User level Access to
0 "Operator" (machine
supervisor) *
Displays of measured values and system status
1 "Authorized Operator"
(Authorized Client) *
Displays, inquiries and parameters required for start-up or adjustment to
customer-specific demands and diagnosis
2 "Service" Displays, inquiries as well as the main parameters required for service
tasks (e.g. diagnosis and clearance of possible malfunctions)
To Next Page
Loading...
