SICK S3000 User Manual

Chapter 4 Operating instructions
S3000
34 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8009942/WK81/2012-11-28
Subject to change without notice
Configurable functions
Functions Standard Advanced Professional Expert Remote
11)
Application diagnostic output, warning field
output and reset output instead of universal I/Os

Field sets consisting of one protective field and
one warning field (dual field mode) or two
protective fields (dual protective field mode)
2
12)
4
888
13)
Programmable monitoring cases in standalone
mode
1 41616–
Programmable monitoring cases in an EFI system 1 4 16 16 16
Velocity routing using a Flexi Soft safety controller – – – – –
 The user interface of the CDS in compatibility mode corresponds to the user interface of
CDS version 3.6.6.
 The related operating instructions delivered with the device are to be used for older
devices (see 1.3 “Scope” on page 8).
11)
Valid for I/O modules with serial number > 11240000.
12)
The second field set on the S3000 Standard can only be used as a simultaneous field set.
13)
Maximum possible number of field sets — the actual number is the same as for the S3000 variant to which an
S3000 Remote is connected.
Tab.
6
:
Functions of the
I/O modules in compatibility
mode
Notes

SICK S3000 Specifications

General

Brand	SICK
Model	S3000
Category	Scanner
Language	English