Operating instructions Chapter 4
S3000
8009942/WK81/2012-11-28 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 35
Subject to change without notice
Configurable functions
Interoperability in an EFI system depending on the firmware version
Firmware
S3000 Standard
S3000 Standard
S3000 Advanced
S3000 Advanced
S3000
Professional
S3000
Professional
S3000
Professional CMS
S3000 Expert
S3000 Remote
S3000 Remote
Firmware
JB02.41
ZB02.35
JB02.41
ZB02.35
JB02.41
ZB02.35
ZB02.35
14)
JB02.41
JB02.41
ZB02.35
S3000 Standard JB02.41 X X X XX
S3000 Advanced JB02.41 X X X XX
S3000 Professional JB02.41 X X X XX
S3000 Expert JB02.41 X X X XX
S3000 Remote JB02.41 X X X XX
Tab. 7: Required compatibility mode with different firmware versions of the S3000 in an EFI system with other S3000
= Compatibility mode required
X = Compatibility mode not required
15)
Firmware
S300 Standard
S300 Standard
S300 Advanced
S300 Advanced
S300 Professional
S300 Professional
S300 Professional
CMS
S300 Expert
S300 Expert
S300 Expert CMS
Firmware
J02.10
<02.10
J02.10
<02.10
J02.10
<02.10
<02.10
14)
J02.10
<02.10
<02.10
14)
S3000 Standard JB02.41 X – X X X
S3000 Advanced JB02.41 X – X X X
S3000 Professional JB02.41 X – X X X
S3000 Expert JB02.41 X – X X X
S3000 Remote JB02.41 X – X X X
Tab. 8: Required compatibility mode with different firmware versions of the S3000 in an EFI system with other safety laser scanners
= Compatibility mode required
X = Compatibility mode not required
16)
– = EFI system not possible
The S300 Mini does not support the compatibility mode. For EFI systems with the S300
Mini safety laser scanner, a device must be used that is not operated in the compatibility
mode.
14)
This variant supports exclusively the compatibility mode.
15)
Make sure that you have the latest S3000 I/O module (S3000 Standard, Advanced, Professional with
I/O module with serial number > 12210000, S3000 Remote with I/O module with serial number
> 11240000).
16)
Make sure that the serial number of the S300 system plug is > 12210000 and that the S3000 I/O module is
current (S3000 Standard, Advanced, Professional with I/O module with serial number > 12210000, S3000
Remote with I/O module with serial number > 11240000).
Note
To Next Page
Loading...
