Maintenance
EVERY 300 HOURS
Complete machine
Check of tolerance limits between pins and
bushings of all joints
See par. “6.5.3” pag. 111
Speed multiplier gear-
box
Checking and restoring the lubricating oil level See par. “6.7.1” pag. 119
Vibrating head
Jaw opening / closing cylinder seal gasket kit
replacement
-
EVERY 2000 HOURS
Hydraulic system Replace oil* See par. “6.6.5” pag. 115
Speed multiplier gear-
box
Lubricating oil replacement See par. “6.7.2” pag. 120
WARNING (*)
In addition to the interval indicated, if special events occur (tampering, leaks,
repairs to the hydraulic system), it is advisable to always check the state of
cleanliness of the oil and the hydraulic system itself and, if necessary, replace
the hydraulic oil.
109
SICMA S.r.l.
To Next Page
Loading...