User and maintenance manual - SEMI-MOUNTED HARVESTER WITH TRUNK SHAKER - TR80
Rev. 0 - 05/2021
NOTE (*)
The switch (11) works only if the machine is supplied with the mini electric
actuator (optional accessory).
WARNING (**)
Before switching on the vibration, the switch (10) must be in the middle
position (neutral).
During vibration do not act on the switch (10).
ATTENTION
When changing vibration gear, make sure that the vibrating head is completely
stopped. DO NOT change the vibration gear abruptly, as the vibration system
could be damaged beyond repair.
The Manufacturer declines all responsibility in the event of damages due to
improper use.
88
To Next Page
Loading...