Mounting and installation of the com
Mounting and assembling a station
5
72 | 354
5.2.4.2 Install operating add-on
For stations in a Comfort housing, operating add-ons are installed in the bottom
half of the housing. For stations in an Eco or Standard housing, operating add-ons
must be installed in a separate housing. Additional operating add-ons can be
mounted in separate additional housings. The mounting is carried out as described
for the operating unit.
Figure 35: Example view of Comfort housing with operating add-on
1 Fixing screws (left)
2 Operating unit
3 Fixing screws (right)
4 Operating add-on
See also
2 Mounting and wiring the operating unit [➙ 69]
1
4
1
To Next Page
Loading...
