5
59 |
Building Technologies
'Limited access (view only)'
In this operation mode Cerberus-Remote indicates the same as the 'Station'
connected to it, but you cannot operate the linked 'Station'.
The figure in Cerberus-Remote indicates the display with all indicated texts, all
LEDs in their current state and all buttons.
'Full access (view/operation)'
In this operation mode, the connected 'Station' is visualized as in the 'Limited
access (view only)' operation mode. Additionally, the 'Station' can be operated with
Cerberus-Remote, while normal operation on the 'Station' is blocked, but can be
reactivated.
' must have priority, this restriction (blocking) on the
'Station' can be cancelled at any time.
Each time an attempt is made to operate the 'Station', a window is displayed with
the option to abort the connection with Cerberus-Remote.
The LED test also tests the display. However, the LEDs are not displayed in
'Cerberus-Remote'.
You will find more information on configuring a permanent operation mode for
Cerberus-Remote in chapter 'Configuring permanent access for Cerberus-
Remote [➙ 119]'.
See also
2 Cerberus Remote [➙ 38]
2 Connecting Cerberus Remote [➙ 105]
To Next Page
Loading...
