Siemens S120 - Page 116

Power Modules
4.2 Blocksize Power Modules (PM240-2)
AC Drive
116 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
Line voltage 3-phase 380 … 480 VAC ± 10%
Internal
Push-through
Order number
without integrated line filter
with internal line filter
6SL3210–
1PE22-7UL0
1PE22-7AL0
6SL3210–
1PE23-3UL0
1PE23-3AL0
6SL3211–
1PE23-3UL0
1PE23-3AL0
PE connection
On line connector
Max. motor cable length
3)
shielded/unshielded
m
50 / 100
Degree of protection
IP20
IP54
Weight
Without line filter
With line filter
kg
kg
4,7
5,3
4,8
5,4
5,8
6,3
1)
Rated output of a typical standard induction motor at 400 V.
2)
The input cu
rrent depends on the motor load and line impedance. The input currents apply for a load with the type rating
(based on I
rated
) for a line impedance corresponding to u
k
= 1%.
3)
Max. motor cable length 50 m (shielded) for PM240-2 Power Modules with integrated line filter to maintain the limit
values of EN 61800-3 Category C2.
4)
Power loss in the cabinet: 0,075 kW. The remaining power loss is dissipated via the heat sink.