Power Modules
4.1 Safety instructions for Power Modules
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
87
Note
Connection authorization
Power Modules have been designed for use in the industrial environment and generate
current harmonics on the line side as a result of the rectifier circuit.
When connecting a machine with integrated Power Modules to the public low
-voltage line
supply, authorization is required in advance from the local power supply company (utility
company) if
the rated input current of the motor ≤ 16 A per conductor, and
the rated input current of the motor does not comply with the requirements specified in
EN 61000-3-2 regarding current harmonics.
-approved system use UL-approved cables only.
To Next Page
Loading...
