Siemens SIMATIC PCS 7 SMART - The Current Status; Current Status of Your Project

7.4 The current status...
7.4.1 Current status of your project
Completed configuration tasks
You have learnt the following when configuring SFCs:
● Worked with standard functions such as renaming and opening.
● Created a sequential control system with graphic support.
● Renamed and assigned parameters to the steps and transitions of the sequential control
system.
● Optimized the run sequence.
Creating SFCs
7.4 The current status...
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
128 Getting Started, 12/2017, A5E42181435-AA