Siemens SIMATIC PCS 7 SMART - Interconnecting Blocks in the CFC_LI111

4. The CFC should now appear as follows:
5. Close the chart.
6.6.17 Interconnecting blocks in the "CFC_LI111"
Prerequisites
● The "CFC_LI111" CFC is open in the CFC Editor.
● All blocks are inserted, renamed and configured.
Creating CFCs
6.6 Working with the CFC Editor
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA 95