Basic procedure
Step Action
1 Open library (Page 64)
2 Store all blocks in your master data library (Page 65)
The PCS 7 wizard automatically generates the master data library when you create a
project.
3 Store process tag types in the master data library (Page 67)
6.2.3 Working with the master data library
Creating a master data library for a large project requires detailed planning before the CFC
charts are actually created. In this Getting Started, we will provide you with all the blocks you
require for the "color_gs" project. These objects are listed in the table below.
Legend for the tables
● Object name: This is an alphanumeric code for the block that is displayed in PCS 7 SMART.
● Symbolic name: Short descriptive name for the block.
● Meaning: Short description of the purpose of this block.
● Type of block: Defines the block category.
● Associated CFC: Returns all CFCs where the block is installed.
Master data library blocks
Store the required blocks in your master data library. You need the following blocks for the
"color_gs" project:
Object
name
Symbolic
name
Meaning Type of
block
Associated
CFC
FB1809 DoseL Dosing of materials (quantity and flow) Dosing block CFC_FC111
FB1823 Integral Generates the time integral of an input
value
Mathematical
block
CFC_LI111
CFC_FC111
FB1828 Lag Smoothing the input value (low-pass
filter)
Mathematical
block
CFC_LI111
FB1845 MonAnL Monitors an analog measured value Monitoring block CFC_LI111
FB1866 OpDi01 Manipulates a digital value Operator control
block
CFC_FC111
CFC_SETP
FB1869 Pcs7AnIn Processes an analog input value sig‐
nal
Channel block CFC_LI111
CFC_FC111
FB1870 Pcs7AnOu Processes an analog output value sig‐
nal
Channel block CFC_FC111
Creating CFCs
6.2 Working with libraries
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA 63
To Next Page
Loading...
