Configuring the operator station
9
9.1 Introduction to the OS project editor
Introduction
The "OS Project Editor" is used to configure the OS. This needs to be adapted so that the
computer settings match. Otherwise, the "button set" at the bottom of the screen cannot be
seen in PCS 7 SMART .
Prerequisites
● WinCC Explorer is open.
Procedure
1. In the WinCC Explorer, select OS(1) > OS Project Editor to open the editor.
2. Select the "Layout" tab.
3. Select the screen resolution and "Monitor configuration" of your monitor.
4. Click "OK".
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA 139
To Next Page
Loading...
