11.3 Process mode preparation
Preparation
New charts and a new process picture were created when plant component RMT1 was copied
to create RMT2. This new information must now be downloaded to the automation system and
"made known" to the OS.
You use the central "Compile and Download Objects" function for this purpose. In this situation,
PCS 7 SMART provides you with the option of compiling and downloading only the changed
information. This reduces the time required for the compile and download operation. Since
your "color_gs" project is small, there is no problem. When configuring large plants, this option
gains insignificance.
Once the compile and download operation is complete, you need to adapt the RMT2 process
picture.
Then you can activate process mode and test the functions.
Performing the additional task
11.3 Process mode preparation
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
188 Getting Started, 12/2017, A5E42181435-AA
To Next Page
Loading...
Need help?
General
