Siemens SIMATIC PCS 7 SMART - The Current Status; Current Status of Your Project

9.8 The current status...
9.8.1 Current status of your project
Completed Configuration Tasks
At this point, your project is complete, thus enabling you to activate process mode. You have
become acquainted with the following functions during the OS configuration:
● Setting the picture properties in SIMATIC Manager.
● Creating block icons.
● Compiling the operator station.
● Creating a process picture in the Graphics Designer with a variety of objects. for example,
static and dynamic objects.
Configuring the operator station
9.8 The current status...
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
170 Getting Started, 12/2017, A5E42181435-AA