Siemens SIMATIC PCS 7 SMART User Manual

Requirements for Getting Started
3
3.1 Hardware requirements for Getting Started - Part 1
Hardware components
The list below shows the hardware components you need for Getting Started. For some
hardware components, you must use a specific version because it is not possible to work on
Getting Started with an older version.
Hardware Component Version Used in Getting Started Other Version Possible
PG or PC with a standard
network card
Intel® PRO/1000 Yes
Rack UR2 Yes
Power supply PS 407 4A Yes
CPU CPU 410 SMART Firmware V8.2 Yes
Crossover cable No
USB hardlock PCS 7 SMART V9.0 No (Hardlocks are version
specific)
Use of other hardware components
If you are using other hardware components, you must place them in the relevant places. For
example, in HW Config, we recommend the usage of same components that are used in
Getting Started.
If you have different hardware, you can find additional information in the "
ES Configuration
Manual ".
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA 17

Siemens SIMATIC PCS 7 SMART Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 SMART
Category	Control Systems
Language	English