Siemens SIMATIC PCS 7 SMART - Procedure; Opening the Color_Gs Project; Adapting the Hardware for the Color_Gs Project

12.2 Procedure
12.2.1 Opening the color_gs project
Introduction
This step is necessary only if you want to work with the color_gs project of the "color_gs.zip"
file. You can extract the zip file using a SIMATIC Manager function.
Prerequisite
SIMATIC Manager is open.
Procedure
1. Select File > Retrieve.
2. Open the folder in which you have stored the "color_gs.zip" file.
3. Select file "color_gs.zip" and click "Open".
4. If you want to accept the default folder, click "OK".
5. If you have created a separate folder for the color_gs project, navigate to this folder and
then click "OK".
Retrieval from the archive is then started. After retrieval from the archive, the "Retrieve from
Archive" message window opens.
6. Click "OK".
"The multiproject 'color_gs_prj_MP' has been retrieved from the archive. Do you want to
start it now?" dialog box opens.
7. Click "Yes".
12.2.2 Adapting the hardware for the color_gs project
Prerequisites
● The color_gs project is open in SIMATIC Manager.
● The component view is activated.
Starting and adapting the color_gs project
12.2 Procedure
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
198 Getting Started, 12/2017, A5E42181435-AA