11.2 Copying the existing 'RMT1' part of the plant
Prerequisites
ā The color_gs project is open in SIMATIC Manager.
ā The Plant View is activated.
ā Configuration of the RMT1 plant component is complete and error-free.
Procedure
1. Use the "Copy/Paste" function in Windows to copy the complete "RMT1" hierarchy folder
to the "Plant1" hierarchy folder.
SIMATIC Manager generates a copy of the "RMT1" hierarchy folder, names it "RMT1(1)"
and saves it to the "Plant1" hierarchy folder. The names of the objects, for example, CFCs
and SFCs, are also appended with a sequential number.
When you copy/move hierarchy folders which contain CFCs and process pictures, the
references of dynamic objects are also copied from OS pictures to CFC blocks in the target
hierarchy folder.
Note
If you copy or move charts and pictures individually, they are not copied or moved within
the hierarchy folder. The references of the dynamic objects are lost and they must be linked
to the blocks again in the pictures.
2. Change the names of the hierarchy folder and the objects in the individual hierarchy folders
according to the table below:
Hierarchy folder New name Object contained ā old
name
New name
RMT1(1) RMT2 RMT1(1)" process picture RMT2
SFC_RMT1(1) SFC_RMT2
FC111 FC112 CFC_FC111(1) CFC_FC112
ADDIT ADDIT2 CFC_SETP(1) CFC_SETP2
LI111 LI112 CFC_LI111(1) CFC_LI112
NK 111 NK115 CFC_NK111(1) CFC_NK115
NK112 NK116 CFC_NK112(1) CFC_NK116
NK113 NK117 CFC_NK113(1) CFC_NK117
NK114 NK118 CFC_NK114(1) CFC_NK118
NP111 NP112 CFC_NP111(1) CFC_NP112
Performing the additional task
11.2 Copying the existing 'RMT1' part of the plant
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
186 Getting Started, 12/2017, A5E42181435-AA
To Next Page
Loading...
Need help?
General
