Siemens SIMATIC PCS 7 SMART User Manual

5. Click "OK" to apply the settings.
"PARA_DOS_RM1_SEL" name is displayed in the CFC block header. When you create the
process pictures, you will interconnect the I/Os of the blocks from the CFCs with objects in
the process pictures. The tag name is formed from the plant hierarchy, the CFC name, and
the block name. You will find the "PARA_DOS_RM1_SEL" name again as part of the tag
name.
The values of the inputs/outputs are applied.
Block Block name in the project I/O Meaning Value Unit
OpDi01 PARA_DOS_RM1_SEL Out.Value* The output of the proc‐
ess value is verified.
0
* Invisible in CFC.
6. Close the CFC.
Do not create unnecessary block icons
In the "Properties - Block" dialog box of the the "General" tab, "Create block icons" determines
whether a block icon is created for use in WinCC. Do not set the check mark for blocks with
inputs and outputs that cannot be configured.
6.6.9 Inserting the blocks into the "CFC_FC111"
Prerequisites
● The "CFC_FC111" CFC is open in the CFC Editor and is saved in the "color_gs_prj_MP
\color_gs_prj_Prj\Plant1\RMT1\ FC111\" folder.
● The catalog is open, and the "Libraries" tab is visible.
● The "color_gs_prj_Lib\S7 program(1)\Blocks" folder is open in the tree view.
Creating CFCs
6.6 Working with the CFC Editor
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
84 Getting Started, 12/2017, A5E42181435-AA

Siemens SIMATIC PCS 7 SMART Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 SMART
Category	Control Systems
Language	English